Filter By:
- Electronics (352)
- Eyewear (78)
- Fenders (185)
- Hydration (463)
- Lighting (539)
- Locks/Security (338)
- Nutrition (116)
- Packs/Racks/Baskets (979)
- Show More Categories
- Pumps/Inflation (387)
- Safety (204)
- Storage (101)
- Tools/Maintenance (1613)
- Trailers/Strollers (98)
- Other (204)
- Indoor Cycling (92)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Accessories
The lever setter is a unique tool that works in conjunction with our HAG (or other hanger allignment tool) to set brake and shifter levers at the same height from side to side. The tool temporarily replaces the headset top cap and allows you to thread a hanger alignment tool into the lever setter. Use the HAG indicator to set levers the same from one side of the bar to the other. Once you're satisfied with your lever placement simply remove the tool and replace your headset top cap and go ride.
Compatibility:
Requires a star nut or compression plug with a M6x1 thread.
Works with road and mountain shifters and brake levers.
Compatible with most hanger alignment tools on the market.
Recommendations:
It's advised to use a spacer on top of the stem to help align the lever setter with the steer tube. This will reduce the impact the quality of the cut on the steer tube has on the function of the tool. The supplied threaded stud can be replaced with a longer one if needed.
Banjo Brothers' Handlebar bag is a great way to add extra carrying capacity to any bike. It conveniently attaches to your bars or even under your saddle with its easy-to-use straps. The rigid liner prevents sagging and there's a reflective strip protecting a 2-way zipper.
- Waterproof IPX7: Operates even after 30 minutes of submersion in a depth of 1 meter
- 3x brighter than EL135
- OptiCube lens technology
- Low battery indicator
- Mode memory function
- Two light modes (Constant / Flashing)
- Replaceable bracket spacer
- FlexTight bracket
- Runtime : Constant: 30 hours (50 lumens) (Approx.) Flashing: 250 hours (50 lumens)
- Battery type : 2 x AA alkaline battery
- 5 ultra bright LEDs
- Design offers high visibility
- 3 modes: rapid, flashing, constant
- Run time: R - 60h to 120h, F - 40h to 120h
- 2x AAA batteries included
- FlexTight bracket
- Complete, high quality bicycle reflector set
- Includes 1x RR-165-BPR Rear reflector (red), 1 x RR-165-BP2W front reflector (white) and 2x RR-550N-WUW wheel reflectors (white)
- Also includes brackets to mount on most seatposts and handlebars
- Made with USDA-certified organic ingredients
- Natural honey sandwiched between 2 thin waffles
- Allergens: contains wheat & soy, may contain traces of eggs
- Ideal fit for very short stems with steep upward stem angles
- 1cm rise in the base will allow larger cycling computers like the Garmin 1030 to nest securely above the stem without interference
- CNC Machined Aluminum
- Combo Compatible (K13-580 adapter sold separately)
- GARMIN approved replaceable computer insert protects computer tabs
- Anodized Black with laser etched logos
- Payload Capacity: Top 123g / Bottom 242g with combo adapter
- Weight- 50g
Compatibility:
- All Garmin Cycling Computers
- Combo (GoPro-style light/camera interface) adapter compatible (K13-580-BLK sold separately)
- Direct mounting for an aero cockpit
- Strongest platform for your cycling computer and light or camera
- Compatible: Future, Venge, Tarmac stems
- Fits all Wahoo computers including Wahoo Roam
- CNC machined 6016-T6 aluminum
- Weight: 54g
- One bolt Specialized SL& stem face plate mounting system
- Includes mounting bolt and TNut
- Lifetime Warranty
- Made in Boise, Idaho USA
- CNC Machined Aluminum
- Combo Compatible (580 Add-On sold separately)
- WAHOO approved replaceable computer insert protects computer tabs
- Anodized Black with laser etched logos
- Payload Capacity: Top - 123g / Bottom 242g with combo adapter
- Weight: 50g
- Mount Type: Clamp 31.8mm
- Mount Weight: 53g
Compatibly:
- All Wahoo Cycling Computers- ROAM, BOLT, ELEMNT, MINI
- Combo compatible (GoPro-style light/camera interface), K13-580-BLK adapter sold separately
- CNC Machined Aluminum
- Combo Compatible (580 Add-On sold separately)
- WAHOO approved replaceable computer insert protects computer tabs
- Anodized Black with laser etched logos
- Payload Capacity: Top - 123g / Bottom 242g
- Weight: 63g
- Mount Type: Clamp 31.8mm
- Mount Weight: 53g
Compatibly:
- All Wahoo Cycling Computers- ROAM, BOLT, ELEMNT, MINI
- Combo (GoPro-style light/camera interface) K13-4500-31.8-BLK
- Creates a dry ceramic coating for increased durability and performance in dry condition
- Excels in dry and dusty conditions
- Biodegradable
- Integral UV tracer dye and UV torch to aid accurate application and ensure total protection
- Take your recovery to a whole new level
- 20 grams of Plant based Protein
- Whole Superfoods, Chia & Flax Seeds
- Omega-3, fiber, and antioxidants for digestive health and more
- Extended length down tube piece to protect this high risk area from rock chips, wear & scratches
- Fits all makes, models and sizes
- Designed around mountain bike geometry
- Frame coverage ~10%. Includes downtube and extra pieces
- Easy install and high durability
- Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth
- Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day
- A low surface energy means that less dirt sticks to your bike and is easier to clean
- 10 year warranty against discoloration and cracking
- Available in either matte or gloss finish to match factory paint and is nearly invisible once installed
A set of waterproof roll top sacks for extra protection of your gear or safety organize your packing.
- Lightweight but strong TPU- / PU-Coated 70D Ripstop
- Full welded construction.
- Easy-open buckle.
- Replacement freehub body compatible with Neo 2T (T2875.60), Flux S (T2900S.60 A), Flux 2 (T2980.60 A) direct drive trainers
- NOT compatible with older generation Neo (T2800), Neo 2 (T2850/T2850.60), Flux (T2900), Flux S (T2900S/T2900S.60) and Flux 2 (T2980/T2980.60)
- High quality Kraftform Plus screwdrivers.
- Multi-component Kraftform Plus handle
- Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer.
- The tips are microscopically roughened for optimal bite to the screw.
- "Take it easy" tool finder with color coding according to profiles and size stamp
- The hexagonal anti-roll feature
- High quality Kraftform Plus screwdriver.
- Multi-component Kraftform handle for fast and low-fatigue working.
- Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer.
- Holding function
- Anti-roll feature prevents any bothersome rolling away at the workplace.
- Handle markings for simplified finding and sorting of the tool.
- Bit socket with 1/4 inch drive and holding function.
- "Take it easy" Tool Finder with color coding according to size
- Bit socket with 3/8 inch drive and holding function.
- "Take it easy" Tool Finder with color coding according to size
- Practical rack for wall mounting.
- Provides tidy storage for the screwdrivers.
- Compatible with all Srewdrivers.
- Perfect finishing touch to a bike built
- 7075-T6 aluminum
- M5 x 15mm
- 4Nm max torque
- For water bottle cages only.
- Never use these aluminum bolts in a structural application.
- Insulated bottle, keeps liquid cold (or warm) for more than 2h
- Made from BPA-free, taste-less and odour free polypropylene
- Internal metallic PET and polyethylene foam insulation
- Fits all standard bottle cages
- Made in France
- 750ml
- Multi position mirror
- Universal bar end mounting
- Fully adjustable with 3 angle rotation
- Folds on impact
- Extra large and convex unbreakable chrome plated ABS mirror face: better peripheral vision.
- Design for road bikes
- Installation and angle adjustment without tools
- Made of ultra-resistant black polymer resin
- Mounts onto the seat post
- Blade width: 45 mm
$0.94
This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.
$0.99 - $55.90
Eurostyle Chamois Butt’r is the most popular chamois cream for cyclists who prefer a soothing cooling formula. It's the lube of choice for many top men and women pro riders. It's a non-greasy skin lubricant that improves your riding comfort by preventing rubbing and chafing. It's safe for use on even the most delicate fabrics and it washes right off the skin and out of shorts easily with soap and water. And, it also helps extend the life of your cycling shorts by restoring the softness and suppleness of both natural and synthetic chamois pads. The single-use packets are just right for taking along on rides or events or giving to friends who need more comfort. The tube or jar is the perfect size for your drawer or gear bag and offers many applications.
$1.00
Universal Handlebar Bracket Lever
- Original polymer adjustment lever for use with UNI-BRKT handlebar mount
- (Does NOT include metal lever retainer or rubber strap)
$1.05 - $2.88
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
$1.36
Precision brake bleeding tools and adaptor kits for Magura brake systems.
$1.41 - $38.00
Created for daily use before and during training and competition, the new GU Energy Stroopwafel delivers all the nutrients needed to power your performance: quality carbohydrates (immediate and long-lasting energy from complex and simple carbohydrates), essential amino acids (prevent mental fatigue and repair muscle damage during long-duration activities), and electrolytes (replenish what’s lost when you sweat). The Stroopwafel is made with a layer of delicious syrup between two thin wafers, and it’s individually packaged to make it portable and easy to take on a ride or run.
Page 1 of 190
Next page